Added corner radius smoothing to all layers with corner radius.

Added corner radius with smoothing to Video Stream layer.

Added a shortcut command (Option+L) for collapsing selected layers recursively.

Added a shortcut command (Ctr+Option+Down) for inspecting an instance.

Added the ability to search a font in the font picker.

Added recently used fonts in the Font picker.

Added the ability to transition percentage value in a transition patch.

Added ability to create port categories for component outputs to organize them.

Added control to inspect values for different loops of a component when inspecting component instances.

Added Enable port to Time and Device Time patches so that they can be turned off when not needed.

Added ability to click on bound ports to go to the binding patch when inside a linked component.

Added ability to view text values in popover when inside linked components.

Layers are now inserted/pasted inside selected groups by default and above other layers.

A new Paste Over Selection option is available to paste above the selected group.

Ability to show/hide Point Of Interest on the Static Map Layer.

Improve performance of the JSON popover.

Improve performance on the Layer List while the Patch Library is loading.

Connections will now snap to the closest port, making it easier to connect patches.

Warning users to upgrade old files, for more information see fb.watch/q0IdovRxjH/

Added Advanced Recording options (Ability to specify codec and quality).

Enter into a component without having to unlink it! You can access this feature by double clicking a patch or layer component, or selecting the component and using the shortcut (Control+Option+Down), or right-clicking and “Inspect Instance”.

New Component Publishing Flow

Improve media patch design to be more readable

Improve navigation from patch to layer

Added three new entry points for opening patch picker to make it easier and more accessible.

Removed lower contrast patch styles from Experiments. Made lower contrast the default styling and added a high contrast preference.

Improve patch port highlighting. Now when a port is selected, only highlight connections to/from it not the entire patch.

Updated how patches look when dimmed. Patches that are dimmed now have an opaque background so they are still legible when overlapping other patches.

Value at Index, Value at Path and Value for Key now support multiple types.

Add Sublayer Container deletion validation to prevent deleting when component instances have sublayers that would end up hidden.

Added support for multipart/form-data content type in Network Request patch and added support for passing media through JSON patchesj to upload files via the Body input.

Added support for Sound and Video types in the Network Request patch.

Added support for longer network requests by disabling timeout.

Improved Javascript console and added the ability to clear messages.

Add a way to edit text values in a popover.

Removed support for the old Origami System Maker file format. See documentation for migration or use an older version of Origami Studio.

Removed quick interactions from Canvas..

Added Encode/Decode patch support for Sound type.

Added preference to specify pasted image origin scale to settings, replacing rarely used popover when pasting.

Access Image types from JS Patch.

Support for Lottie animations.

Remember the last tab selected on Color Picker.

New Patch Redesign.

New and improved logic for component creation.

Layer Search enables searching by layer name and filtering by various types. Access via the bottom of the layer panel.

We have bumped the minimum supported macOS version from 10.15 to 11.0.

Access custom system colors through the color picker.

Added iPhone 14 devices

Component layer list now shows the number of instances of a component.

Added enum support for JavaScript patch.

Improved Icon input experience when Publishing a System.

Additional asset details are now available on the Asset Manager.

Released the new JavaScript patch allowing the use of JavaScript logic in prototypes.

Publish Components menu item is now enabled inside components.

Origami remembers the last published directory when exporting local components.

Added separation between layers and patches when publishing a system.

Added a preview image for patch components when publishing a system.

Add Smooth Corner Radius (Squircles)

Manually check for new versions of local components without reopening your file using Component > Check for Local Component Updates

View where assets are being used within Asset Manager

Allow to duplicate layer outputs.

Option to invert zoom direction.

Bumped minimum supported macOS version to 10.15 and iOS to 13.4.

Ability to copy/paste ports from the Component Popover Editor.

Added brand new asset manager.

Spring Animation now supports other types like Point and Color.

Ability to copy/paste ports from the Component Popover Editor.

Inputs and Outputs (purple patches) are now placed in the center of the screen when created.

Added new patches and a port in the inspector for applying effects to layers.

Ports in the patch graph can now expand to show more content.

Keyboard Patch now supports Arrow keys and other key presses like Shift, CapsLock, Control, Option, Command, Escape, Delete, and Tab.

Added Safe Area to Device Info

Added better support for four-dimensional values including Point 4D, Edges, and Corner Radius as pack/unpack patches and in type-variant patches.

Blend modes for layers

Added support for Airpods motion tracking in the Device Motion patch (only available on iOS devices).

Add hover to layer preview icon on patches

Add more levels of zoom in the Patch Editor

Looped layers show in Hover state.

Updated Game Controller patch to support progress values on L2/R2 buttons.

Continued to improve performance of various patches.

New properties to have more control over the soft keyboard.

Embedded Virtual Soft Keyboard in viewer, no need for “Fake Keyboard” patch anymore.

Ports are expanded when hovering over and editing them

Audio Metering working for videos.

Snippets, which make adding precomposed sets of patches a breeze.

Duplicate ports by right-clicking in the component info menu.

Added improved previews for JSON value types in port values.

Adds iPhone 13 Devices and reduces size of the previous devices.

Improves caching from network requests.

Improved Performance for Patch Port Views.

More patches are loop aware now.

Added Deceleration Rate to Scroll Settings

Vertical Split View Preference.

Renderer Sparse Updates for improved performance.

Origami now automatically removes duplicate resources to reduce file size.

Keyboard shortcut to reorder ports in patches with multiple inputs like Loop Builder, Option Picker, Math, and Logic Patches, etc. Use Cmd + [↑ or ↓] or Cmd + Shift + [↑ or ↓] for moving ports up or down. Pressing Shift will move to the top or bottom of the list of ports of the same type.

Layers sizes can now be set to a percentage of their parent size, such as 100% width or 50% height.

Swap a layer or a patch for a different one by right clicking and selecting “Replace with”. This is useful for replacing instances with an alternative component.

Container Components. Components can now contain sublayers via the “Sublayer Container” layer and write and read from them using its “Virtual Sublayer”. This allows you to create off-the-shelf container components, such as a grid layout component or transition component.

Big performance improvement on data patches.

Searching patches now animates the scroll to the patch for better frame of reference of where you are in the patch graph.

Alignment options respects comments if a comment is selected in the patch graph.

JSON, quick interactions, and component input/output patches are arranged more clearly in the patch graph.

Double-click insertion on input ports now pushes over patches to make room, just like for output port double-click insertion.

Patch autolayout option is now called “Tidy Up” and includes a shortcut (Control+T) for quick usage.

Value tracing improved for transition and animation patches.

Adds shortcut mappings to the patch context menu items for learnability.

Patch autolayout. (beta)

Comments can be resized from any edge/corner..

Comments added to selection if selection box intersects header instead of entire comment.

Improved performance of patches that work on JSON values.

Improved performance in both the engine and the renderer.

Improved performance of the math expression patch.

Added SF Pro to the list of default available fonts.

Clicking wireless receiver icon bounces and centers its broadcaster.

Middle mouse button panning in canvas and patch graph.

Holding command while dragging a connection to a multi-input patch pushes down other connections and values to make room for the inserted connection.

Selecting a patch draws it in front of other patches.

Drag a single patch over a connection to insert it in between the patches of the old connection.

Double-click insertion for ports pushes overlapping patches to the right to make room for the inserted patch.

Ungrouping a component selects its ungrouped patches.

Clicking on bound values in inspector bounces and centers patch and source patch.

Component patch grouping is smarter about input/output connections.

Component Info popover UI updates: inputs are now grouped by category; multiselecting to drag and drop ports, detaching the popover into its own window, and resizing the popover are all supported now.

Added millisecond output to the Device Time patch.

Component System Publishing flow: can publish a component system directly inside your document.

Dark mode: Origami UI now supports dark mode and defaults to system preference for visual appearance.

Add support to Rasterize/Unrasterize layer hierarchies.

Improved UX for Tag selection. Tags are now associated to types when creating component ports.

New Portal and Portal Mini devices.

Name splitters based on connected ports.

Show layer name for layer outside current container.

Better default scale handling for Viewer.

Updated aliases for a few patches.

Better Dimension/Spacing conversion

Allow Components to have examples.

Apple M1 support.

Comparison view for upgrading individual components.

Show cleaner version number in Studio.

Individual Component upgrades.

Builtin patches upgrade automatically now.

Improve default window size for ultrawide monitors.

Viewer now will warn you when running prototypes in low battery mode.

Added Window Menu shortcuts for Welcome Window sections, such as Examples and Tutorials.

Added support for static preview images in patch documentation.

Components upgrade flow is non-blocking on document open and can be accessed through layer list and patch picker.

New combined picker for patches and layers.

Copy to Figma plugin now include Auto Layout information.

New Featured Templates section in the Welcome Window, with general updates to the templates.

Support of Auto Sizing on Video Stream Layer.

Origami gets a new look for macOS Big Sur

Improve cables value popover display no longer requiring double click.

Progress indicator added to welcome window.

Support to the new Apple’s M1 processor.

Add Mouse Scrolling support to Mouse patch.

Loops of Loops.

Added Home, Acceleration and rotation ports support to the Game Controller patch.

Layout and Text properties on the Inspector now use Segmented controls instead of dropdown selectors.

Preserve wireless receivers when copy/paste

Allow to use Haptics and ViewFinder together (only iOS 13+)

Allow to drag and drop files from Origami to Finder.

Add preference to avoid playing media on Canvas.

Allow JSON as an input for Text Attributes.

Much improved screen recording performance.

New Toolbar enabled by default

Loading Output on Image Layer

Allow the use of virtual cameras in Studio.

Rename Duplicated Layers

Improvements on screen recording performance.

Ability to edit search keywords on Components

🌟 Patch Output Popovers

New Interaction Handlers in Canvas

Much Improved Patch Picker Documentation

🌟 New Welcome Window with

• Patterns
• Examples
• Tutorials

Right click support on Mouse Patch

🌟 Dual Camera support on both iOS and macOS

More Improvements on prototype recording

Improved component cleanup

Better heuristics on Smart Layout

New Cursor Patch

Improved performance and fidelity on prototype recording.

Upgraded Game Controller Patch.

CMD+Scroll to Zoom in Canvas.

New Custom AHAP https://developer.apple.com/documentation/corehaptics/representing_haptic_patterns_in_ahap_files?language=objc File Support for Haptics Patch

Better Artboard positioning when pasting from Sketch or Figma

🌟 New Color Picker, can be enabled in the Experiments tab preferences.

Classic Animation and Pop Animation now support different data types like Position.

Device Info patch now exposes dark mode.

🌟 Encode/Decode Patches to convert to and from base64.

Added current time and duration to the Sound Player patch.

Updates to Main Component.

Change sets being used on Visual Layout, for a big perf win.

Prevent closing JSON Popover when interacting with Viewer.